Easy DIY LED Lights & Electric With Quality Control
tony@ledsolarwind.com
促销！
MeanWell LED Driver APV-8W-12V

MeanWell LED 8W 12V/24V Power Supply APV-8-12/24V (8W, 12V/24V) input 90-264VAC output 5V 12V 24V- High Efficiency, Compact Design for Indoor Light 10 Pack

Original price was: $65.00.Current price is: $55.00.

MeanWell LED Power Supply APV-8-12/24V (8W, 12V/24V) – High Efficiency, Compact Design for Indoor Light

Model APV-8W
APV-8 Features

Watt 8W
Output 12V/24VDC
Input 90-264VAC

Constant voltage design
Universal AC input/Full range
Class Ⅱ power unit,no FG
Fully isolated plastic case
IP42 design
Small and compact size
Cooling by free air convection
Protections:Short circuit/Overload /Over voltage
No load power consumption <0.5W
100%full load burn-in test
Lowcost,high reliability
2 years warranty

APV Series Features
·Constant voltage mode for APV series
·Universal AC input : 90~264VAC
·Withstand 300VAC surge input for 5 secs. (APV-25/35)
·Isolation class II,no F.G.
·Class 2 power unit / Pass LPS
(except for APV/APC-8,APC-25-350 and APC-35-350/500)
·Fully isolated plastic case with IP42 level
·Protections: Short Circuit / Overload (only for APV series) /
Over Voltage(except for APC-8)
·No load power consumption <0.5W for APV/APC-8
·2 years warranty

 

Description
APV-8 series is one 8W AC/DC constant voltage mode single output LED power supply.
It accepts the full range input 90~264VAC and provides three models with different output voltage,5V,12V, 24V,respectively,that the small wattage LED applications employ the most frequently.
Exploiting Class ll design (without FG pin)and adopting the 94V-0 flame retardant plastic enclosure,APV-8 ideally fits the entry-level LED applications.

Download APV-8W-12V PDF 

MeanWell LED Driver APV-8W-12V-24V Details

premium-quality Trust

APV-8W-12V Trust List

Meanwell 8W 12/24V Power Supply APV Series Description
APV series is one AC/DC constant voltage mode single output LED power supply.
It accepts the full range input 90~264VAC and provides three models with different output voltage,5V,12V, 24V,respectively,that the small wattage LED applications employ the most frequently.
Exploiting Class ll design (without FG pin)and adopting the 94V-0 flame retardant plastic enclosure, ideally fits the entry-level LED applications.

Mutual calculation of voltage, current and power:
P—Power V—Voltage I—Ampere
Voltage is equal to power divided by current: (V=P/I).
Current is equal to power divided by voltage: (I=P/V).
Power equals voltage times current: (P=V times I)

LED Lights Quantity matching
8W 1W*8LED 2W* 4LED 3W*3LED 4W*2LED 5W 6W 7W 8W *1LED

MeanWell LED Driver APV-8W-12V   Details and Trust List

 

List/Certification  SAFETY & EMC

  • SAFETY STANDARDS  UL8750,CSA C22.2 No.250.0-08,BIS IS15885(except for 5V), BIS IS15885(R-62002178 made in India only), EAC TP TC 004, BS EN/EN 62368-1 approved
  • EMC EMISSION
    Compliance to BS EN/EN55032,BS EN/EN61000-3-2,BS EN/EN61000-3-3, EAC TP TC 020
  • EMC IMMUNITY
    Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020

SPECIFICATION

MODEL APV-8-5 APV-8-12 APV-8-24
DC VOLTAGE 5V 12V 24V
RATED CURRENT 1.4A 0.67A 0.34A
CURRENT RANGE 0 ~ 1.4A 0 ~ 0.67A 0 ~ 0.34A
OUTPUT RATED POWER 7W 8.04W 8. 16W
RIPPLE & NOISE (max.)  Note.2 250mVp-p 250mVp-p 300mVp-p
VOLTAGE TOLERANCE  Note.3 ±5.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±2.0%
SETUP, RISE TIME 500ms, 30ms / 230VAC            1500ms,30ms / 115VAC at full load
HOLD UP TIME (Typ.) 20ms/230VAC at full load
VOLTAGE RANGE  Note.4 90 ~ 264VAC          127 ~ 370VDC (Note.6)
FREQUENCY RANGE 47 ~ 63Hz
INPUT EFFICIENCY (Typ.) 74% 80% 81%
AC CURRENT 0. 15A/230VAC    0.3A/115VAC
INRUSH CURRENT(Typ.) COLD START 70A(twidth=120μs measured at 50% Ipeak) at 230VAC
LEAKAGE CURRENT 0.25mA / 240VAC
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER LOAD Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16V 27.6 ~ 32.4V
Protection type : Shut off o/p voltage, clamping by zener diode
WORKING TEMP. -30 ~ +70℃(Refer to “Derating Curve“)
WORKING HUMIDITY 20 ~ 90% RH non–condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 45℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes
SAFETY STANDARDS Note.8 UL8750 , CSAC22 .2 No .250 .0-08 , BIS IS15885(except for 5V) , BIS IS15885(R-62002178 made in India           only) , EACTPTC 004 , BS EN/EN 62368-1 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC
EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Compliance to BS EN/EN55032,BS EN/EN61000-3-2,BS EN/EN61000-3-3, EACTPTC 020
EMC IMMUNITY Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8, 11; light industry level(surge 2KV),  EACTPTC 020
MTBF 9638.4K hrs min.      Telcordia SR-332 (Bellcore) ;       1631.5K hrs min.      MIL–HDBK-217F (25℃)
OTHERS DIMENSION 60*30*23.5mm(L*W*H)
PACKING 0.05Kg;144pcs/7.6Kg/0.79CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltage. Please check the static characteristics for more details.

5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be                                 affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)

6. When applying DC voltage for input, please connect the brown input wire to the positive side whereas blue input wire to the negative side.

7. This product is not intended for LED lighting luminaire applications in the EU and China.(In the EU and China the LPF/NPF/XLG/XLC/XLN series                       are recommended.)

8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

9. Products sourced from the Americas regions may not have the ENEC/BIS logo. Please contact your MEAN WELL sales for more information.

10. For any application note and IP water proof function installation caution, please refer our user manual before using.                                                                       https://www.meanwell.com/Upload/PDF/LED_EN.pdf

※ Product Liability Disclaimer ：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

 

 

 

滚动至顶部