DC Power Supply for Quick DIY LED Lights and Machines with UL&EMC List
tony@ledsolarwind.com
促销！
12VDC Power Supply 200WMeanwell NPF-200 picture
12VDC Power Supply 200W Meanwell NPF-200 IP67 3in1 dimming Power Supply - 图片 2
Meanwell Power Suppluy NPF-200V-12 OUTPUT LOAD
Meanwell Power Suppluy NPF-200V-12 OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC TOTAL HARMONIC DISTORTION (THD)
12VDC Power Supply 200W Meanwell NPF-200 IP67 3in1 dimming Power Supply - 图片 5
Meanwell Power Suppluy NPF-200V-12 BLOCK DIAGRAM& DRIVING METHODS OF LED MODULE
Meanwell NPF-200V-12 specifications

12VDC Power Supply 200W Meanwell NPF-200 IP67 3in1 dimming Power Supply

原价为：$45.00。当前价格为：$39.00。

Product Features

# 12VDC Power Supply 200W Meanwell NPF-200V-12 IP67 3in1 dimming Power Supply

Features

#Constant voltage
#Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance)
#Wide AC input: 90~305VAC
#No load power consumption <0.15W (<0.5W for D-Type)
#Fully isolated plastic case with IP67 level
#Isolation class II, no F.G.
#Class 2 power unit
#Protections: Short Circuit / Over Current /Over Voltage / Over Temp.
#Plastic housing with class ll and PFC design
#Constant Voltage + Constant current mode output
#Standby power consumption <0.5W
#IP67 rating for indoor or outdoor installations
#Dimming function: 3 in 1 Dimming(C.V Dim. only)
#to adjust output voltage level
#Flicker free Design
#Typical lifetime >50000hours
#5 years warranty

#Other Optional Voltage
12V/24V/36V/42V/48V/54V

Specifications

#Description of Meanwell NPF-200
NPF-200 series is a 200W AC/DC LED driver featuring the constant current or constant voltage mode output.
NPF-200 operates from 100~305VAC and offers models with different rated voltage ranging between 12V and 54V.
Thanks to the high efficiency up to 94% with the fanless design,the entire series is able to operate for-40℃~+85℃ case temperature under free air convection.
The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations.
NPF-200 is particular design without flicker Dimming Function which is suitable for LED strip or Poultry lighting applications.

#Product Specification

Specification DatasheetMeanwell Power Supply NPF-200V-12
#OutputDC Voltage12V24V
Constant Current and Output Voltage Region6-12V12-24V
Working VoltageRated Current10A8.3A
Current Range15A199.2W
Rated Power180W150mVp-p
Ripple Noise (max. Note.2 120mVp-p±4.0%
Voltage TOLERANCE Note.3 ±4.0%±0.5%
LINE REGULATION ±0.5%±0.5%
LOAD REGULATION±2.0%
Current Tolerance±5.0%
SETUP, RISE TIME Note.3500ms/230VAC or 115VAC
Rice Time80ms for Blank type, 200ms for V-type
HOLD UP TIME (Typ.) 10ms/230VAC or 115VAC
#InputVOLTAGE RANGE Note.2100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.)PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
EFFICIENCY (Typ.) 92%93%
AC CURRENT 2.2A / 115VAC 1.1A / 230VAC 0.9A / 277VAC
INRUSH CURRENT(Typ.) COLD START 65A(twidth=550 μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER. 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.25mA / 277VAC
STANDBY POWER CONSUMPTION <0.5W for V-type only (Output voltage dim to off)
#ProtectionOver Current95 ~ 108% Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
Over Voltage13 ~ 18V Protection type : Shut down o/p voltage, re-power on to recover27 ~ 34V
SHORT CIRCUITHiccup mode or Constant current limiting, recovers automatically after fault condition is removed
Over TemperatureShut down o/p voltage, re-power on to recover
#EnvironmentWORKING TEMP.Tcase=-40 ~ +85°C (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
WORKING HUMIDITY20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY-40~+80°C, 10~ 95% RH
TEMP. COEFFICIENT±0.03%/°C (0 ~ 40°C for LPV-150-12
VIBRATION10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
MAX. CASE TEMP.Tcase=+85°C
TEMP. COEFFICIENT±0.03%/°C (0 ~ 40°C)
#Safety & EMC StandardsSAFETY STANDARDSUL8750(type”HL”), CSA C22.2 No. 250.13-12, According to BS EN/EN61347-2-13 appendix J suitable for emergency installations. ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, EAC TP TC 004, GB19510.1,GB19510.14,IP67 approved; Design refer to BS EN/EN60335-1
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC
ISOLATION RESISTANCEI/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMISSIONCompliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@ load≧60%) ; BS EN/EN61000-3-3; GB/T 17743, GB17625.1, EAC TP TC 020
EMC IMMUNITYCompliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level(surge immunity Line-Line 2KV); EAC TP TC 020
MTBF2625.4K hrs min. Telcordia SR-332 (Bellcore) ; 247.5K hrs min. MIL-HDBK-217F (25°C)
DIMENSION195*68*39.5mm (L*W*H)
PACKING1.03Kg; 12pcs/ 13.4Kg/ 0.71CUFT
Note1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75°C or less.
6. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
7. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
9. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
10. Tolerance : includes set up tolerance, line regulation and load regulation.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
# Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

#Application
LED panel lighting
LED downlight
LED decorative lighting
Industrial lighting
Sign board and back light
LED strip lighting(C.V Dimming)
Agricultural lighting(C.V Dimming)
Poultry lighting (C. V Dimming)
Type “HL”for use in Class I, Division 2 hazardous (Classified)location

#Meanwell Power Supply Specifications

12VDC Power Supply 200WMeanwell NPF-200-spec

#Meanwell Power Supply User’s Manual

Meanwell Powe Supply user's Manual

相关产品

滚动至顶部